documentation:installation_wanpipe [Fédération FDN]

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.
Sangoma A104D PCI-E version:
05:04.0 Network controller: Sangoma Technologies Corp. A104d QUAD T1/E1 AFT card

Identifying the cards: [[http://wiki.sangoma.com/sangoma-hardware-matrix]]


====== Firmware ======

From [[http://wiki.sangoma.com/wanpipe-linux-aft-firmware-update]] :  [[ftp://ftp.sangoma.com/firmware/A104dm_0100_V44.BIN]]
  

====== Driver ======

[[http://wiki.sangoma.com/Wanpipe-Linux-Driver]]

====== Dependencies ======

  aptitude install gcc g++ automake autoconf libtool make  libncurses5-dev flex bison patch linux-headers-$(uname  -r) sqlite3 libsqlite3-dev **

[[ftp://ftp.sangoma.com/linux/current_wanpipe/wanpipe-3.5.27.tgz]]

====== Installation ======


[[http://wiki.sangoma.com/Wanpipe-Driver#wanpipe-linux-installation]]

Yate uses [[http://yate.null.ro/pmwiki/index.php?n=Main.Wpcard]]
.. apparently in B+D (HDLC) mode

====== Build driver package ======


  # Modified /etc/apt/sources.list to use `testing main`.
  aptitude update
  aptitude dist-upgrade
  # Install 3.2.0-3-rt-amd64 (as of writing )
  aptitude install linux-image-rt-amd64
  /sbin/shutdown -r now  # make sure we are running the kernel we will compile for
  
  # Then maybe:
  aptitude purge  linux-image-3.2.0-2-amd64 linux-image-3.2.0-3-amd64
  aptitude purge  linux-headers-3.2.0-2-amd64 linux-headers-3.2.0-3-amd64
  
  # In any case:
  aptitude -y install git etckeeper
  aptitude -y install curl
  aptitude -y install linux-headers-rt-amd64
  # At this point, FIX /lib/modules/3.2.0-3-rt-amd64/build/Makefile and replace.:
    VERSION = 3
    PATCHLEVEL = 2
    SUBLEVEL = 0
    EXTRAVERSION = -3-rt-amd64
   
  # Then continue:
  aptitude -y install build-essential gcc-multilib automake autoconf libtool flex bison   sqlite3 libsqlite3-dev libncurses5-dev
  cd /usr/src
  
  
  # curl -O [[ftp://ftp.sangoma.com/linux/current_wanpipe/wanpipe-3.5.27.tgz]]
  curl -O [[ftp://ftp.sangoma.com/linux/custom/3.5/wanpipe-3.5.27.5.tgz]]
  tar xzf wanpipe-3.5.27.5.tgz
  cd wanpipe-3.5.27.5/
  
  ./Setup builddeb --64bit_4GB --no_woomera

====== Screenshot ======


  root@ss7-gw2:/usr/src/wanpipe-3.5.27# ./Setup builddeb --64bit_4GB --no_woomera

  Installing modules for kernel: 3.2.0-3-rt-amd64 !
  
  
      ----------------------------------------------------------
                WANPIPE v3.5.27.5 Installation Script
          Copyright (c) 1995-2012, Sangoma Technologies Inc.
      ----------------------------------------------------------
  
  
          
      WANPIPE DEB BUILD
  
  Wanpipe DEB will be build based on the 
  following Environment variables.
       
      1. Linux Source Dir  : /lib/modules/3.2.0-3-rt-amd64/build
  
      2. Linux Source Name : 3.2.0-3-rt-amd64
  
      3. Current Image Name: 3.2.0-3-rt-amd64
      
      4. CPU Type          : x86_64
      
      5. Wan Protocols     : FR-CHDLC-PPP-MFR-MPROT-X25-AFT_TE1-AFT_TE3
      
      6. Build Directory   : /usr/src/wanpipe-3.5.27.5/debbuild 
  
  
  
  Would you like to build WANPIPE DEB ? (y/n) **y**

====== Installation of the driver ======


  dpkg -i --force-overwrite wanpipe_35275-k320-3-rt-amd64_x86_64.deb

====== Test ======

  
  /usr/sbin/wanrouter hwprobe
  
  -------------------------------
  | Wanpipe Hardware Probe Info |
  -------------------------------
  1 . AFT-A104-SH : SLOT=4 : BUS=5 : IRQ=11 : CPU=A : PORT=1 : HWEC=128 : V=43
  2 . AFT-A104-SH : SLOT=4 : BUS=5 : IRQ=11 : CPU=A : PORT=2 : HWEC=128 : V=43
  3 . AFT-A104-SH : SLOT=4 : BUS=5 : IRQ=11 : CPU=A : PORT=3 : HWEC=128 : V=43
  4 . AFT-A104-SH : SLOT=4 : BUS=5 : IRQ=11 : CPU=A : PORT=4 : HWEC=128 : V=43
  
  Sangoma Card Count: A104=1 
  
(Notice firmware revision is 4.3.)


====== Update firmware ======


<code>
root@ss7-gw2:/etc/wanpipe/firmware/wan_aftup# **./update_aft_firm.sh **

Warning: Wanpipe modules loaded
         Please remove wanpipe modules from the kernel

         eg: wanrouter stop

root@ss7-gw2:/etc/wanpipe/firmware/wan_aftup# **wanrouter stop**

ERROR: Wanpipe configuration file not found:
               /etc/wanpipe/wanpipe1.conf

No devices running, Unloading Modules
root@ss7-gw2:/etc/wanpipe/firmware/wan_aftup# **./update_aft_firm.sh **
modprobe wan_aften  > /dev/null
AFT card enabled

Sangoma AFT Series card update flash software (version 1.9)

Sangoma AFT card list:
 w1g1: AFT-A104-SH : SLOT=4 : BUS=5 : IRQ=32 : CPU=A : PORT=1 : HWEC=128 : V=43 (Ver.43)

Please select card interface [def=w1g1; q=exit] > **w1g1**

List of available versions: 
     Version no. 43 (filename=A104dm_0100_V43.BIN)
     Version no. 44 (filename=A104dm_0100_V44.BIN)
Please specify version number [def=44; q=exit] > **44**

w1g1: Current Sangoma Flash: Revision=43 ID=0x205B
    Erasing sectors                Passed
    Updating flash                Passed
    Verification                Passed
w1g1: Sangoma Flash update            DONE

w1g1: Reloading Sangoma flash        DONE
w1g1: Restore PCI registers            DONE
w1g1: Sangoma Flash updated successfully

modprobe -r wan_aften
AFT card disabled
</code>

====== Configuring Wanpipe ======


[[http://wiki.sangoma.com/wanpipe-linux-yate-configuration]] (uses wpchan) (but I guess the comment on MTU/MRU for bearer channels still applies? MTU/MRU=2400 -> 10ms for 30 channels)

[[http://www.sangoma.com/assets/docs/misc/2008_09_18_Conferencing_with_Sangoma_Wanpipe.pdf]]

All Yate docs for ysgichan / ss7 indicate that wpcard should be used; the Sangoma doc therefor would suggest: [[Config Wanpipe]]

(Issues I had:
1. wancfg sets Rx Level to 360 = 36dB?!)
2. MTU/MRU depends on the number of channels )
Also make sure to set the UDP Debugging port to 0.

Use `dmesg` to see the errors logged by the driver.


====== Operations ======

Once the ports are up, `wanpipemon -g` is very useful.